How I weave one pattern repeat of this color gamp

-
A friend recently asked me if I could take a video of myself weaving. Since the Lunatic Fringe 10/2 cotton 27 color gamp is finally up and running, I took the time to record myself making a pattern repeat for her. I explain a few of the things I'm doing so she could understand. Since the point of the blog is to remember what I've learned, I thought it might be a good idea to post it here. Enjoy!

How I weave one pattern repeat of this color gamp.

Comments

Post a Comment

Popular posts from this blog

Getting Started

-
In February of this year my grandmother moved into assisted living. My grandfather died in the living room in November and she had a hard time being in the space after that, which is completely understandable. This proved to be an amazing decision as COVID would have made things quite difficult for her to remain in her home by herself. This meant moving from an, albeit small, house to a room. Of course, there's no room in her new studio apartment for a MaComber floor loom. I'm the crafty one in the family, and when the right of first refusal came to me, while I had no idea if it would fit in my Brooklyn apartment, I just had to agree to take it. There are so many memories in this loom of crafting with grandma in the basement of her house in Cape Cod when I was a kid. The loom was valuable not only because of it's value as a floor loom, but it also held all these memories in it and I just couldn't let it go. So after much preparing and measuring of our guest room, mo...
Read more

Weaving Project 003 - Spiral Houndstooth Cowl

-
Image
NAME: Spiral Houndstooth Cowl DATES: 4/23/2022 to 1/2/2023 YARNS USED: Harrisville Shetland in Black and Delphinium PATTERN: #59 SOURCE: A Handweaver's Book of 8-Shaft Patterns LENGTH OF WARP: 120" WIDTH OF WARP: 15" SETT (ENDS PER INCH): 8 EPI DIMENSIONS BEFORE WASHING: 14" x 79" DIMENSIONS AFTER WASHING: 12" x 70" % SHRINKAGE: 11% LENGTH OF WASTE WARP: ~16" GOAL OF PROJECT: a balanced fabric 10 1/2" x 68" for a cowl WAS GOAL MET? absolutely! DISCOVERIES: Firstly, I'm super proud of this one. I absolutely hated weaving it, though. I'm used to knitting and I'd compare the process of weaving this to knitting alpaca yarn on metal needles. It can be done, but it feels kind of slimy. While on the loom the pattern wasn't really that visible. It looked like a simple checked pattern. It really only became visible after the fabric was blocked (I guess in weaving terms this is wet finished). I made a sample so I...
Read more

Things I Learned Last Week

-
Image
There seem to be a few things specific to my loom that Learning to Weave doesn't cover. This is likely going to lead to another, probably more helpful post on the anatomy of my Macomber B5. More to the point, I think it might be more searchable for folks like me looking for an explanation of what tehse parts are without knowing what they're called. But here are the things I leraned this week: 1. My warp beam wasn't turning. I found a handle for it so I could try to turn it, which helped a bit, but what really helped was the Ravlery Macomber Looms group. I learned that the loom has a friction brake (I have really only known of ratchet brakes, so this was new to me!). Here's what that looks like: When the friction brake is on, it's difficult to turn the warp beam. I can press on teh brake while weaving from the front of the loom, but while warping that's difficult since I'll be at the back of the loom. This lead me to lesson nubmer 2... 2. A step block ...
Read more