Posts

Showing posts with the label table loom

Weaving Project 002 - Sampler Scarf

Image
NAME: Sampler Scarf DATES: 2/17/2021 to 3/5/2022 YARNS USED: light pink wool from grandma's statch Harrisville Shetland in black PATTERN: It's a sampler of stitch patterns in black with pink tabby sections in between. SOURCE: The Handweaver's Pattern Directory Mixed Twills p. 38 top for 3" 3/1 twill p. 37 middle for 5 3/4" 2/2 twill p. 33 middle for 4" A twill I'm not sure of, but one I seemed to like since I did it for 9"! 2/2 twill p. 33 middle for 3 1/8" tabby with 2 colors p. 30 bottom for 1" 1/3 twill p. 36 middle 2 1/2" 2/2 twill p. 32 top for 4 1/2" 2/2 tabby for 4 1/2" LENGTH OF WARP: 8 yards WIDTH OF WARP: 14" SETT (ENDS PER INCH): 10 DIMENSIONS BEFORE WASHING: I didn't measure it before washing! DIMENSIONS AFTER WASHING: 54" (and 4" on each side for fringe) x 11 1/2" % SHRINKAGE: #N/A LENGTH OF WASTE WARP: not sure yet PREVIOUS POSTS ON THIS PROJECT...

Warping Failure to Launch

Image
DO YOU WANT TO SEE A TOTAL WARPING FAILURE? If you said "Warp, yeah!" read on! To continue learning about weaving I decided to make a scarf on a table loom at my parents'. I measured out an 8 yard warp of 140 ends figuring a sett of 10 epi with this unknown dusty pink wool from Grandma's stash. Things were going well. Then I took the warp off the warping board, adn things started to go not well. While I had tied knots around every 10 warps, the ties seemed a little too far away from the end of the warp to keep them together. I also realized, once I put the warp on an apron rod, that I had no idea which warp ends were the edge of the warp. I did my best, and then thought I'd try to beam teh warp (this process of warping is new to me. The last time I warped front to back, not back to front, so I didn't realize that I had to keep all the ends in sequential order at the end of the warp as well as on the cross). When I started beaming, I realized that t...

Well, What's Next?

So, I have some carry over vacation days to use and I'm using them this week. Unfortunately, I'll be spending the week away from Rey at my parents' in Rhode Island. There is, however, a table loom (also from my grandmother) that I'm going to try to use while I'm there just to keep learning. I have a lot of pink wool yarn that I think I'll use with some black Harrisville shetland yarn that came with the Macomber that I'll use to create a scarf. I talked with someone I met at the NY Handweaver's Guild (virtual) meeting in December a couple of weeks ago. She said that one of her first projects was a warp where she tried out a bunch of twill patterns with some plainweave between. She said she learned a lot from that, so I think I might try something similar with this black and pink wool (using the pink as the warp because I have so much of it). When I get back to Rey, after I finish replacing the apron strings, I have a couple of projects in mind. I...